| Pre-Consumer Recycled Content Percent | 0% |
| Post-Consumer Recycled Content Percent | 0% |
| Total Recycled Content Percent | 0% |
| Age Recommendation | Ages 16 and Up |
| Intended Application Environment | Interior/Exterior |
| Color(s) | White |
| Color Family | White |
| Recommended Level of Ventilation | Moderate |
| Finish/Sheen | Flat |
| Volume Capacity | 1 gal |
| Product Biodegradability Indicator | N |
| Product Compostability Indicator | N |
| Product Biodegradability in Days | 0 |
| Applicable Surface Material | Cement; Concrete; Drywall; Glass/Ceramics; Masonry; Metal; Plaster; Plastic; Wood |
| Application Method | Brush; Roller |
| Application Temperature Range | 0º and 90ºF |
| Binder/Vehicle Ingredient(s) | Shellac |
| Diluent/Solvent Ingredient(s) | Denatured Alcohol; Water |
| Disclaimer Statement | B-I-N Shellac-Base Primer is not recommended for whole surface exterior application or for application to floors, decks, or any surface subject to immersion or prolonged contact with water. Apply only when air, material, and surface temperatures are between 0 and 90ºF (-18 and 32ºC) and the relative humidity is below 70%. Do not apply B-I-N if surface temperature is within 15°F of the dew point. Substrate moisture should not exceed 12%. DO NOT THIN. |
| Footnote 1 | Recommended Dry Film Thickness (DFT) Per Coat: 0.75 to 0.9 mils |
| Footnote 2 | Recommended Wet Film Thickness to Achieve DFT: 2.5 to 3 mils |
| Global Product Type | Building/Construction Paints & Primers |
| Packaging Type | Bucket/Pail |
| Paint Sub-Category | Primer, Shellac-Based |
| Cure/Dry-Time Range | 20 min (Touch); 45 min (Handle, Re-Coat); 1-3 Days (Full Cure) |
| Maximum Coverage Area | 500 sq ft |